Changing The Aging Time - SMC Networks 6824MPE INT Management Manual

CLI – This example also displays the address table entries for port 11.
Console#show mac-address-table ethernet 1/11
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/11 00-10-b5-62-03-74
Console#

Changing the Aging Time

You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables or disables the aging time.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
CLI – This example sets the aging time to 300 seconds.
Console(config)#mac-address-table aging-time 300
Console(config)#
Console#
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#
Vlan Type
Figure 3-65 Address Aging Time
A
DDRESS
1 Learned
T S
ABLE ETTINGS
4-208
4-209
4-209
3-145