Table 18-2 Configuration Command Modes - SMC Networks TigerStack II SMC8848M Management Manual

O
VERVIEW OF THE
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode
Line
Access
Control
List
Class
Map
DHCP
Interface interface {ethernet port |
MSTP
Policy
Map
Router
VLAN
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
. .
.
Console(config-if)#exit
Console(config)#
18-10
C L
OMMAND

Table 18-2 Configuration Command Modes

Command
line {console | vty}
access-list ip standard
access-list ip extended
access-list mac
access-list ipv6 standard
access-list ipv6 extended
class map
ip dhcp pool
port-channel id| vlan id}
spanning-tree
mst-configuration
policy map
router rip
vlan database
I
INE NTERFACE
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-cmap)
Console(config-dhcp)
Console(config-if)#
Console(config-mstp)#
Console(config-pmap)
Console(config-router)
Console(config-vlan)
Page
20-22
23-3
23-3
23-17
23-10
23-10
32-3
35-8
24-2
29-10
32-5
37-9
30-7