Showing Commands - SMC Networks TigerStack II SMC8848M Management Manual

Showing Commands

If you enter a "?" at the command prompt, the system will display the first
level of keywords for the current command class (Normal Exec or
Privileged Exec) or configuration class (Global, ACL, DHCP, Interface,
Line, Router, VLAN Database, or MSTP). You can also display a list of
valid keywords for a specific command. For example, the command
"show ?" displays a list of possible show commands:
Console#show ?
access-group
access-list
arp
bridge-ext
calendar
class-map
dns
dot1x
garp
gvrp
history
hosts
interfaces
ip
ipv6
lacp
line
log
logging
mac
mac-address-table
management
map
policy-map
port
protocol-vlan
public-key
pvlan
queue
radius-server
rip
router
running-config
snmp
sntp
spanning-tree
ssh
startup-config
system
tacacs-server
users
version
vlan
Console#show
Access groups
Access lists
Information of ARP cache
Bridge extend information
Date information
Display class maps
DNS information
Show 802.1x content
GARP property
Show GARP information of interface
Information of history
Host information
Information of interfaces
IP information
IPv6 information
Show LACP statistic
TTY line information
Login records
Show the contents of logging buffers
MAC access lists
Set configuration of the address table
Show management IP filter
Map priority
Display policy maps
Characteristics of the port
Protocol-VLAN information
Show information of public key
Information of private VLAN
Information of priority queue
RADIUS server information
RIP
Router
The system configuration of running
SNMP statistics
SNTP
Specify spanning-tree
Secure shell
The system configuration of starting up
Information of system
Login by TACACS server
Display information about terminal lines
System hardware and software status
Switch VLAN Virtual Interface
E C
NTERING OMMANDS
18-5