Table 24-2 Show Interfaces Switchport - Display Description - SMC Networks TigerStack II SMC8848M Management Manual

I C
NTERFACE OMMANDS

Table 24-2 show interfaces switchport - display description

Field
Broadcast threshold
LACP status
Ingress/Egress rate
limit
VLAN membership
mode
Ingress rule
Acceptable frame
type
Native VLAN
Priority for untagged
traffic
GVRP status
Allowed VLAN
Forbidden VLAN
24-16
Description
Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 24-10).
Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 25-4).
Shows if rate limiting is enabled, and the current rate limit
(page 27-1).
Indicates membership mode as Trunk or Hybrid
(page 30-10).
Shows if ingress filtering is enabled or disabled
(page 30-12).
Shows if acceptable VLAN frames include all types or
tagged frames only (page 30-11).
Indicates the default Port VLAN ID (page 30-13).
Indicates the default priority for untagged frames
(page 31-3).
Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 30-4).
Shows the VLANs this interface has joined, where "(u)"
indicates untagged and "(t)" indicates tagged (page 30-14).
Shows the VLANs this interface can not dynamically join
via GVRP (page 30-15).