Figure 12-9 Ip Port Priority - SMC Networks TigerStack II SMC8848M Management Manual

Click Priority, IP Port Priority. Enter the port number for a network
application in the IP Port Number box and the new CoS value in the Class
of Service box, and then click Apply.
CLI – The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
Console(config)#map ip port
Console(config)#interface ethernet 1/1
Console(config-if)#map ip port 80 cos 0
Console(config-if)#end
Console#show map ip port ethernet 1/5
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1
Console#
* Mapping specific values for IP Port Priority is implemented as an interface config-
uration command, but any changes will apply to the all interfaces on the switch.

Figure 12-9 IP Port Priority

80 0
L 3/4 P
AYER RIORITY
S
ETTINGS
31-9
24-2
31-10
31-14
12-15