Logging On; Logging History; Table 20-9 Logging Levels - SMC Networks TigerStack II SMC8848M Management Manual

command to control the type of error messages that are stored in
memory. You can use the logging trap command to control the type
of error messages that are sent to specified syslog servers.
Example
Console(config)#logging on
Console(config)#
Related Commands

logging history (20-35)

logging trap (20-38)
clear log (20-39)
logging history
This command limits syslog messages saved to switch memory based on
severity. The no form returns the logging of syslog messages to the default
level.
Syntax
logging history {flash | ram} level
no logging history {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
• level - One of the levels listed below. Messages sent include the
selected level down to level 0. (Range: 0-7)
Level Severity Name Description
7
6
5
* There are only Level 2, 5 and 6 error messages for the current firmware release.

Table 20-9 Logging Levels

debugging
informational
notifications
E
VENT
Debugging messages
Informational messages only
Normal but significant condition, such as cold
start
L C
OGGING OMMANDS
20-35