Table 23-4 Mac Acl Commands; Show Ipv6 Access-Group - SMC Networks TigerStack II SMC8848M Management Manual

A C
CCESS ONTROL

show ipv6 access-group

This command shows the ports assigned to IPv6 ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IPv6 standard access-list david in
Console#
Related Commands
ipv6 access-group (23-15)
MAC ACLs
The commands in this section configure ACLs based on hardware
addresses, packet format, and Ethernet type. To configure MAC ACLs,
first create an access list containing the required permit or deny rules, and
then bind the access list to one or more ports
Command
access-list mac
permit, deny
show mac access-list Displays the rules for configured
mac access-group
show mac
access-group
23-16
L C
IST OMMANDS

Table 23-4 MAC ACL Commands

Function
Creates a MAC ACL and enters
configuration mode
Filters packets matching a specified
source and destination address,
packet format, and Ethernet type
MAC ACLs
Adds a port to a MAC ACL
Shows port assignments for MAC
ACLs
Mode Page
GC 23-17
MAC-ACL 23-18
PE 23-20
IC 23-20
PE 23-21