M
F
ULTICAST
ILTERING
Web – Click IGMP Snooping, IGMP Member Port Table. Specify the
interface attached to a multicast service (via an IGMP-enabled switch or
multicast router), indicate the VLAN that will propagate the multicast
service, specify the multicast IP address, and click Add. After you have
completed adding ports to the member list, click Apply.
CLI – This example assigns a multicast address to VLAN 1, and then
displays all the known multicast services supported on VLAN 1.
Console(config)#ip igmp snooping vlan 1 static 224.1.1.12
ethernet 1/12
Console(config)#exit
Console#show mac-address-table multicast vlan 1
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
1
14-10
Figure 14-5 IGMP Member Port Table
224.1.1.12
224.1.2.3
Eth1/12
USER
Eth1/12
IGMP
33-3
33-5
Need help?
Do you have a question about the TigerStack II SMC8848M and is the answer not in the manual?
Questions and answers