Spanning-Tree Cost; Table 29-2 Recommended Sta Path Cost Range - SMC Networks TigerStack II SMC8848M Management Manual

S T
PANNING REE
Example
This example disables the spanning tree algorithm for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#

spanning-tree cost

This command configures the spanning tree path cost for the specified
interface. Use the no form to restore the default.
Syntax
spanning-tree cost cost
no spanning-tree cost
cost - The path cost for the port.
(Range: 0 for auto-configuration, or 1-200,000,000)
The recommended range is:
Port Type
Gigabit Ethernet
10G Ethernet
* Use the spanning-tree pathcost method command on page 29-9 to set the path
cost method.
29-16
C
OMMANDS

Table 29-2 Recommended STA Path Cost Range

IEEE 802.1D-1998
3-10
1-5
IEEE 802.1w-2001
*
2,000-200,000
200-20,000
*