Multicast Filtering Commands; Igmp Snooping Commands; Table 33-2 Igmp Snooping Commands - SMC Networks TigerStack II SMC8848M Management Manual

M F
ULTICAST ILTERING

IGMP Snooping Commands

This section describes commands used to configure IGMP snooping on
the switch.
Command
ip igmp snooping
ip igmp snooping vlan
static
ip igmp snooping
version
show ip igmp snooping Shows the IGMP snooping and query
show
mac-address-table
multicast
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form
to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Console(config)#ip igmp snooping
Console(config)#
33-2
C
OMMANDS

Table 33-2 IGMP Snooping Commands

Function
Enables IGMP snooping
Adds an interface as a member of a
multicast group
Configures the IGMP version for
snooping
configuration
Shows the IGMP snooping MAC
multicast list
Mode Page
GC 33-2
GC 33-3
GC 33-3
PE 33-4
PE 33-5