Displaying Dynamically Learned Arp Entries - SMC Networks TigerStack II SMC8848M Management Manual

IP R
OUTING
CLI - This example sets a static entry for the ARP cache.
Console(config)#arp 10.1.0.11 00-11-22-33-44-55
Console(config)#

Displaying Dynamically Learned ARP Entries

The ARP cache contains entries that map IP addresses to the
corresponding physical address. Most of these entries will be dynamically
learned through replies to broadcast messages. You can display all of the
dynamic entries in the ARP cache, change specific dynamic entries into
static entries, or clear all dynamic entries from the cache.
Command Attributes
• IP Address – IP address of a dynamic entry in the cache.
• MAC Address – MAC address mapped to the corresponding IP
address.
• Interface – VLAN interface associated with the address entry.
• Dynamic to Static
entry.
• Clear All
• Entry Count – The number of dynamic entries in the ARP cache.
19. These buttons take effect immediately. You are not prompted to confirm the action.
17-14
19
– Changes a selected dynamic entry to a static
– Deletes all dynamic entries from the ARP cache.
19
36-45