Dynamic Configuration - SMC Networks TigerStack II SMC8848M Management Manual

5. To set the IP address of the IPv6 default gateway for the network to
which the switch belongs, type "ipv6 default-gateway gateway," where
"gateway" is the IPv6 address of the default gateway. Press <Enter>.
Console(config)#ipv6 general-prefix rd 2001:DB8:2222::/4836-12
Console(config)#interface vlan 1
Console(config-if)#ipv6 address rd 0:0:0:7272::72/64
Console(config-if)#exit
Console(config)ipv6 default-gateway
2001:DB8:2222:7272::254
Console(config)end
Console#show ipv6 interface
Vlan 1 is up
IPv6 is enable.
Link-local address:
FE80::200:E8FF:FE90:0/64
Global unicast address(es):
2001:DB8:2222:7272::72, subnet is 2001:DB8:2222:7272::/64
Joined group address(es):
FF01::1/16
FF02::1/16
FF02::1:FF72:64/104
FF02::1:FF90:0/104
MTU is 1500 bytes.
ND DAD is enabled, number of DAD attempts: 1.
ND retransmit interval is 1000 milliseconds
Console#show ipv6 default-gateway
ipv6 default gateway:

Dynamic Configuration

Obtaining an IPv4 Address
If you select the "bootp" or "dhcp" option, IP will be enabled but will not
function until a BOOTP or DHCP reply has been received. You therefore
need to use the "ip dhcp restart client" command to start broadcasting
service requests. Requests will be sent periodically in an effort to obtain IP
configuration information. (BOOTP and DHCP values can include the IP
address, subnet mask, and default gateway.)
If the "bootp" or "dhcp" option is saved to the startup-config file (step 6),
then the switch will start broadcasting service requests as soon as it is
powered on.
2001:DB8:2222:7272::254
I C
NITIAL ONFIGURATION
24-2
36-14
36-24
36-22
36-25
2-15