Table 36-1 Ip Interface Commands; Show Ipv6 Interface - SMC Networks TigerStack II SMC8848M Management Manual

IP I C
NTERFACE

show ipv6 interface

This command displays the usability and configured settings for IPv6
interfaces.
Syntax
show ipv6 interface [brief [vlan vlan-id [ipv6-prefix/prefix-length]]]
• brief - Displays a brief summary of IPv6 operational status and the
addresses configured for each interface.
• vlan-id - VLAN ID (Range: 1-4093)
• ipv6-prefix - The IPv6 network portion of the address assigned to the
interface. The prefix must be formatted according to RFC 2373
"IPv6 Addressing Architecture," using 8 colon-separated 16-bit
hexadecimal values. One double colon may be used in the address to
indicate the appropriate number of zeros required to fill the
undefined fields.
• prefix-length - A decimal value indicating how many of the contiguous
bits (from the left) of the address comprise the prefix (i.e., the
network portion of the address).
Command Mode
Normal Exec, Privileged Exec
Example
This example displays all the IPv6 addresses configured for the router.
Console#show ipv6 interface
Vlan 1 is up
IPv6 is enable.
Link-local address:
FE80::269:3EF9:FE19:6779/64
Global unicast address(es):
2009:DB9:2229::79, subnet is 2009:DB9:2229:0::/64
Joined group address(es):
FF01::1/16
FF02::1/16
FF02::1:FF00:79/104
FF02::1:FF19:6779/104
MTU is 1500 bytes.
ND DAD is enabled, number of DAD attempts: 1.
ND retransmit interval is 1000 milliseconds
Console#
36-22
OMMANDS