Spanning Tree - SMC Networks TigerStack II SMC8848M Management Manual

CLI – This displays STA settings for instance 0, followed by settings for
each port. The settings for instance 0 are global settings that apply to the
IST (page 10-4), the settings for other instances only apply to the local

spanning tree.

Console#show spanning-tree mst 0
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode:
Spanning tree enabled/disabled:
Instance:
VLANs configuration:
Priority:
Bridge Hello Time (sec.):
Bridge Max Age (sec.):
Bridge Forward Delay (sec.):
Root Hello Time (sec.):
Root Max Age (sec.):
Root Forward Delay (sec.):
Max hops:
Remaining hops:
Designated Root:
Current root port:
Current root cost:
Number of topology changes:
Last topology changes time (sec.):303
Transmission limit:
Path Cost Method:
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status:
Role:
State:
External admin path cost: 10000
Internal admin path cost: 10000
External oper path cost:
Internal oper path cost:
Priority:
Designated cost:
Designated port:
Designated root:
Designated bridge:
Fast forwarding:
Forward transitions:
Admin edge port:
Oper edge port:
Admin Link type:
Oper Link type:
Spanning Tree Status:
. .
.
D I
ISPLAYING NTERFACE
MSTP
enabled
0
2-4093
32768
2
20
15
2
20
15
20
20
32768.0.0000E8AAAA00
1
10000
12
3
long
enabled
root
forwarding
10000
10000
128
0
128.4
32768.0.0000E8AAAA00
32768.0.0000E8AAAA00
disabled
2
disabled
disabled
auto
point-to-point
enabled
S MSTP
ETTINGS FOR
29-25
10-25