Figure 11-5 Vlan Static Table - Adding Static Members - SMC Networks TigerStack II SMC8848M Management Manual

VLAN C
ONFIGURATION
Web – Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from
the scroll-down list. Modify the VLAN name and status if required. Select
the membership type by marking the appropriate radio button in the list of
ports or trunks. Click Apply.

Figure 11-5 VLAN Static Table - Adding Static Members

CLI – The following example adds tagged and untagged ports to VLAN
2.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport allowed vlan add 2 tagged
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport allowed vlan add 2 tagged
Console(config-if)#
11-12
24-2
30-14