Editing Vlan Groups; Vlan Database; Table 30-3 Commands For Editing Vlan Groups - SMC Networks TigerStack II SMC8848M Management Manual

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the show vlan command.
• Use the interface vlan command mode to define the port
membership mode and add or remove ports from a VLAN. The
results of these commands are written to the running-configuration
file, and you can display this file by entering the show
running-config command.
Example
Console(config)#vlan database
Console(config-vlan)#
Related Commands
show vlan (30-16)

Table 30-3 Commands for Editing VLAN Groups

Function
Enters VLAN database mode to add,
change, and delete VLANs
Configures a VLAN, including VID,
name and state
E VLAN G
DITING
Mode
GC
VC
ROUPS
Page
30-7
30-8
30-7