Show Queue Cos-Map; Table 31-4 Priority Commands (Layer 3 And 4) - SMC Networks TigerStack II SMC8848M Management Manual

C S
LASS OF ERVICE

show queue cos-map

This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value:
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Priority Commands (Layer 3 and 4)
This section describes commands used to configure Layer 3 and Layer 4
traffic priority on the switch.
Command
map ip port
map ip port
map ip precedence
31-8
C
OMMANDS
0 1 2 3 4 5 6 7

Table 31-4 Priority Commands (Layer 3 and 4)

Function
Enables TCP/UDP class of service
mapping
Maps TCP/UDP socket to a class of
service
Enables IP precedence class of service
mapping
Mode Page
GC 31-9
IC 31-10
GC 31-10