Ip Interface Commands; Table 36-2 Basic Ip Configuration Commands - SMC Networks TigerStack II SMC8848M Management Manual

IP I C
NTERFACE
Basic IP Configuration
Command
IP Version 4
ip address
ip default-gateway
ip dhcp restart client Submits a BOOTP or DHCP client
show ip interface
show ip redirects
ping
IP Version 6
Interface Address Configuration and Utilities
ipv6 enable
ipv6 general-prefix
show ipv6
general-prefix
ipv6 address
ipv6 address
autoconfig
ipv6 address eui-64 Configures an IPv6 global unicast address
36-2
OMMANDS

Table 36-2 Basic IP Configuration Commands

Function
Sets the IP address for the current
interface
Defines the default gateway through which
this router can reach other subnetworks
request
Displays the IP settings for this device
Displays the default gateway configured
for this device
Sends ICMP echo request packets to
another node on the network
Enables IPv6 on an interface that has not
been configured with an explicit IPv6
address
Defines an IPv6 general prefix for the
network address segment
Displays all configured IPv6 general
prefixes
Configures an IPv6 global unicast address
with an option to use an IPv6 general
prefix, and enables IPv6 on an interface
Enables automatic configuration of IPv6
global unicast addresses on an interface
and enables IPv6 on the interface
for an interface using an EUI-64 interface
ID in the low order 64 bits, and enables
IPv6 on the interface
Mode Page
IC 36-4
GC 36-6
PE 36-7
PE 36-8
PE 36-8
NE, 36-9
PE
IC 36-10
GC 36-12
NE, 36-13
PE
IC 36-14
IC 36-16
IC 36-18