Digital Equipment VAXstation 3100 Maintenance Manual page 203

182 Operating Information
Table 7-1 TZ30 Controls and Indicators
LED
Oreen
Yellow
Orange
All three LEDs
Control/Indicator
Unload-button
Beeper
Cartridge
insert/release
lever
Stale
On (steady)
Off
Blinking
LEDs
Meaning
Okay to operate the cartridge
insert/release lever.
Do not operate the cartridge insert/release
lever.
The drive detects a cartridge error. Okay
to operate the cartridge insert/release
lever.
On (steady) The tape is ready for use.
Regular blinking The tape is in use; the tape is loading or
unloading.
Irregular blinking The tape is in use; a read or write
operation is in progress.
On The tape is write-protected.
Off
On (steady)
Blinking
The tape is write-enabled.
The power-up
self-tests a.re
ri.mriJng
The drive has detected a hard error.
Other Controls and Indicators
Description Function
Momentary Rewinds -the tape and unloads it from-the
switch drive into the cartridge.
Momentary Sounds when the cartridge insert/release
alarm lever is ready to operate.
Mechanical lever Locks the tape cartridge into place.
Sliding the lever to the left (or open)
position enables you to insert the
cartridge; sliding the lever to the right
(or closed) position enables you to lock in
the cartridge.