Utilities - Digital Equipment VAXstation 3100 Maintenance Manual

3
Utilities
The utilities help the user erase a hard disk, set default and restart flags, and
display alignment patterns on VS 3100s monitors as well as other functions.
Table 3-1 describes and lists the console mode TEST (T) commands that
invoke the utilities.
Each utility is available on both model 30 and model 40.
Table 3-1
Test
Number
T 50
T 51
T 52
T 53
T 54
T 55
T 60
1
T 61
1
T62
1
T70
T 72
T73
T75
T
so
2
Utllltles
Utility Envoked
Configuration table (also displays the Ethernet hardware address
for example, ID 08-00-2B-02-CF-A4)
Set NVR default boot device
Set NVR default boot flags
Set NVR default recovery action flags
Sets keyboard language
Shows system exerciser extended summary
Alignment circle and crosshatch (no graphics module installed)
Monochrome screen of E's (no graphics module installed)
Monochrome white screen (no graphics module installed)
Diskette formatter
Special key on diskettes for Field Service mode system exerciser
Special key on tapes for Field Service mode system exerciser
SCSI disk data eraser
Circle-crosshatch (color and monochrome monitm:s)
1
Wtll not work with an 8-plane graphics module installed
2
Wtll work only with an 8-plane graphics module installed
62