Rx23 Drive Controller (Strg-1 On Model 30) - Digital Equipment VAXstation 3100 Maintenance Manual

234 System Exerciser Error Codes
Table F-6 System Memory Error Codes (XXXX.OOYZ)
Error Codes
Definition
0000.0001
Success-No error
0001.000F System software error
0002.000F
System software error
0003.000F System software error
0004.000F System software error
0005.000F System software error
0006.000F System software error
0007.000F
System software error
0008.000F System software error
0001.00lF
Compare error on system module
0002.00lF Compare error on option module
0001.002F
P;uity
error on system module
0002.002F
Parity
error on option module
F.4 RX23 Drive Controller (STRG-1 on Model 30)
Controller error code format: TUVV.XYZl
Where the T indicates the drive used during the transfer test, the U indicates the
results of the transfer test , the VV indicates the error cowit (in hexadecimal)
during the transfer test, and the X, Y, and Z indicate the results of the intenupt
test, register test, and the buffer test respectively. Table F- 7 lists the drive
numbers used during the transfer test (T). Table F-8 lists the error codes for
the U, X, Y, and Z bit positions.
Drive error code format: JKLL.PRS 1
Where the J indicates the drive number, the K indicates the status of the drive,
the LL indicates the error count (in hexadecimal) for the drive. The P, R, and
S indicate the status of the RX23 controller test, the termination code bit from
the interrupt status port register, and the routine test respectively. Table F-7
lists the drive numbers (J). Table F-9 lists the codes for drive status (K).
Table F-10 lists the RX23 controller status codes (P). Table F-8 lists the error
codes for the routine status (S).