Serial Line Controller (Dz) - Digital Equipment VAXstation 3100 Maintenance Manual

(
Power-Up and Self-Test Error Codes 213
Table E-3 Time-Of-Year Clock (0000.XXXX)
Error Codes Deftnltlon
0001 No error
0003 Tell dispatcher to check time at the end of the testing.
0004
lnvalid time set
0005 Clock has not been reset since the last time that battery voltage level
was
low.
0010 Failure
in
time-of-year test
0020 Vrt bit failed to set after it was read the first time.
0040 Battery voltage level was down during the clock test.
E.3 Nonvolatile RAM (NVR)
Error code format: 0000.XXXX
Where XXXX is one of the codes listed in Table E-4. An error code of 5
indicates that the battery voltage is below an acceptable level for data in the
NVR to be valid.
Table E-4 Nonvolatile RAM Error Codes (0000.XXXX)
Error Codes Deftnltlon
0001 No error
0004
Battery was down at last entry.
0008 NVR failed.
0080 The battery check code
in
the NVR did not aggree with the expected
check code.
E.4 Serial Line Controller (DZ)
Error code format: 0000.XXXX
Where the XXXX is one of the error conditions listed
in Table E-5.