Power Supply Removal - Digital Equipment VAXstation 3100 Maintenance Manual

(
VS 3100 (Model 30) System
105
Figure 4-21 Battery Cable Location
llATTl!AY
PACI<
4. Remove the battery pack from its holder.
NOTE
MA
0
XOI07-ll
A new battery needs a minimum of 25 hours of continuous power to
fully charge the battery. If the battery's charge is low, you will see an
error for the NVR. (0000.0005) when you power up the system.
4.2.11 Power Supply Removal
1. Remove the system box cover (Section 4.2.1 ).
2. Remove the drive mounting panel (Section 4.2.2).
3. Disconnect the power cable from the system module.