Digital Equipment VAXstation 3100 Maintenance Manual page 216

Console Commands 195
Data
• The data is specified as a hexadecimal number. The default
number is zero.
B.2.5 DTE
>>>DTE
Converts the system into a dumb terminal emulator. This command is used
when the boot node (server) needs a remote operator's console to run tests,
boot the system, or whatever the regular operator's console is used for. If the
boot node is a model 40 VS 3100 system, the DTE switch on the back of the
system box must be set to the up position before entering this command on
the remote console. The boot node must also be plugged into the printer port
on the back of the system box.
An •
is added to the console prompt>>> when in the DTE command is
entered to indicate that you are operating the boot node. Press
lctrll ~ to
return to normal console mode.
B.2.6 EXAMINE
>>> EXAMINE [<qualifier>] [<address>]
Examines the contents of the specified address. If no address is specified,
+
is
assumed. The address may also be one of the symbolic addresses described
in deposit.
Qualifiers
Same qualifiers as deposit.
Address
Same address specifications as deposit.
The response is in the form: <address space><address><data>