Digital Equipment VAXstation 3100 Maintenance Manual page 244

Power-Up and Self-Test Error Codes 223
(
Table E-17 Device Status Codes (DDMMSSTT)
Status Codes Deftnttlon
FF
Device is untested.
01
No error
03
This device is reserved by the host (SCSI controller).
05
Device did not respond to selection.
10 Device did not set cur_stat(req) soon enough when changing phase.
12
Jitter on the phase lines when changing phase.
20
Device set command phase twice.
22
Device changed phase before command complete.
24 Device failed to set cur_stat(req) when getting command.
26
Device failed to clear cur_stat(req) when getting command
28
Command phase out of sequence
2A
Stuck in command phase
( 30
Device set data in phase twice.
32
Device failed to set cur_stat(req) when returning data.
34
Device failed to clear cur_stat(req) when returning data.
36
Device changed data in phase before transferring any data.
38
Data in phase out of sequence
3A
Stuck in data in phase
40 Target set status phase twice.
42
Target failed to set cur_stat(req) when returning data.
44 Target failed to clear cur_stat(req) when returning data.
46 Target changed status phase before transferring any data.
48
Staus phase out of sequence
4A
Stuck in status phase
50
Target set message in phase twice.
52
Target failed to set cur_stat(req) when returning data.
54
Target failed to clear cur_stat(req) when returning data.
56 Target changed message_in phase before transferring any data.