Digital Equipment VAXstation 3100 Maintenance Manual page 256

(
Table F-7
Code
F
3
2
1
0
Table F-8
Error Codes
0
1
2
(
3
4
5
6
7
8
9
A
B
c
D
E
F
System Exerciser Error Codes 235
Transfer Test Drive Number (T000.0001) (J000.0001)
Drive Used During Transfer Test
No drive is available for transfer testing.
DUA3-Not used
DUA2-RX23 diskette drive
DUAl-Not used
DUAO---Not used
RX23
Controller Test Error Codes (OUOO.XYZ1) (0000.0081)
Definition
Success-No error
Registers 0, l, 2, or 3 not completely verified, rtcnt, invrdy, intnlch,
ready, presdrv, int_done selack(l), skcom(h) not verified
Data path in longword, word, or byte access failed. Unable to verify
an of data buffer, or data path to register 10 not verified.
OMA count error: count register not verified. Count is not 0 after
OMA transfer.
Command is not finished before timeout.
Error in system interrupt logic
Unexpected interrupt before command issued
Command terminated with bad status.
RESTORE command terminated with error status.
STEP command terminated with error status.
SEEK command terminated with error status.
READ command terminated with error status.
WRITE command terminated with error status.
Unable to verify register sequencing in disk controller.
Drive not formatted (UIB, RCT not found. Bad media).
Data checksum is incorrect in transfer test.