Digital Equipment VAXstation 3100 Maintenance Manual page 195

17 4 Operating Information
i;'lgure 7- -.4 RRD40 Compact Disc_ Loading
4. Insert the disc caddy (Figure 7-4). Line up the notches on the caddy with
the notches on the disc access door. Slide the caddy in as far as it will go
and then remove it. When removed, notice that the disc and its housing
remain in the drive. Only the transparent sleeve comes out.
5.
Check that the front panel activity indicator lights within
5
seconds.
H
the drive accepted the disc and the activity indicator does not light, then
the disc may have been orientated in the caddy incorrectly. Unload the
disc using the instructions in the following section. Refer back to step 3
and examine the disc orientation in the caddy. If the disc is orientated
properly, the RRD40 drive may be faulty.