Digital Equipment VAXstation 3100 Maintenance Manual page 202

(
Operating Information 181
7 .4 The TZ30 Tape Drive
This se.ction describes the controls and indicators as well as the operation of
the TZ30 tape drive. The TZ30 tape drive is installed in the system box.
7 .4.1 Controls and Indicators
The front of the TZ30 tape drive has three LEDs, an unload button, and
a cartridge insert/release lever (Figure 7- 10). The TZ30 also has a beeper
that sounds when the cartridge insert/release lever is ready for operation.
Section 7.4.2 explains how to insert, use, and remove the tape cartridges.
n:so
TAl'I
Dl!IVE
Figure 7-10 TZ30 Tape Drive In the VS 3100 System
MA·X1111·H