Digital Equipment VAXstation 3100 Maintenance Manual page 209

A
Console Test Commands
This appendix lists all of the test commands including the utilities. Test
nwnbers for Field Service diagnostics and certain no.ncustomer utilities are
rejected if the loopback connector
is
not installed on the communication port.
Table A-1 Test Commands
Test
TF
TE
TD
TC
TB
TA
T9
T8
T7
T7
T6
T6
T5
T4
T3
188
Diagnostic Commands - Explained in Chapter 1
Self-test on base video (MONO)
Self-test on thue-of-year clock (CLK)
Self-test on nonvolatile RAM (NVR)
Self-test on serial line controller (DZ)
Self-test
on
system memory
(.MEM)
Self-test on memory management unit
(MM)
Self-tt!St
on Ooatin_ g point unit
(FP)
Self-test on interval timer (IT)
Model 30, self-test on RX23 diskette (STR0-1)
Model 30/40, self-test on the SCSI-A bus
Model 30, self-test on the SCSI-A bus
Model 30/40, self-test on the SCSI-B bus
Self-test on interrupt controller and Ethernet ID
ROM (SYS)
Self-test for 8-plane option
Self-test for future option-no test run
Loopbadl