Digital Equipment VAXstation 3100 Maintenance Manual page 257

236 System Exerciser Error Codes
Table F-9 Drive Status Code In 2nd Line (OK00.0001)
Status Codes Deftnltlon
0 No error
1 Drive is fonnatted.
2 UIB and RCT
are
valid.
3 Drive is fonnatted and UIB and RCT
are
valid.
4 Drive is writable
.5 Drive is fonnatted and writable.
6 UIB and RCT ate valid and drive is writable.
7 Drive is fonnatted, writable, and UIB and RCT are valid
Table F-1 O RX23 Controller Status Code in 2nd Line (OOOO.P001)
Status Codes Deftnltlon
0 No error
1 CMP error
3 Sync error and CMP error
4
ECC error
.5 ECC error and CMP error
6 ECC error and Sync error
i
ECC error, Sync error, and CMP error
E Error occured while revectoring
F Revectored bad block
F.5 SCSI Bus Controller (SCSI-A and SCSl-B)
This section includes the codes for all of the SCSI bus controllers on all VS
3100 systems.
Controller code format: TUVV.XYZl