Digital Equipment VAXstation 3100 Maintenance Manual page 253

232 System Exerciser Error Codes
Table F-5 Fatal Device's Error Codes (OOFF.ABCD)
Error Codes Definition
0001 Interrupt mask register, INT_MSK, register bits ST or SR stuck at 1
Error Codes in READ WRITE REGISTER TEST
0002 Master clear failed to reset DZQ.
0003 CSR register: expected %xl028
0004 CSR register failed to clear.
0005 TCR register: expected %xOFOF
0006 TCR register failed to clear.
Error Codes in INTERRUPT BITS TEST
0007 TROY bit in CSR stuck at 1.
0008 TROY bit in CSR failed to set.
0009
OOOA
OOOB
- -OOOG-
0000
OOOE
OOOF
0010
0011
0012
0013
0014
0015
0016
TROY bit in CSR failed to clear after transmitting a character.
TRDY bit in CSR failed to set
a..~er
tra.nsmifting a character.
RDONE bit failed to set after transmitting character in internal
loopback mode.
-SR-bit-in-JNT=:,REQ-register-not-set-by-RDON.t;.-
SR bit in INT_REG register not cleared by writing bit in INT_CLR
register.
Character received: 0 or line number not equal expected
Data valid bit not set in word read.
Silo alarm enable failed to set L'l CSR.
Silo alarm failed to set after transmitting 16 characters in internal
loopback.
RDONE not set after 16 characters received.
SR bit in INT_REQ register not set by silo alarm.
Silo alarm failed to clear after reading a character from silo.
Master clear failed to reset the DZQ.
Unexpected transmit interrupt occurred with interrupt mask bit
cleared.