Digital Equipment VAXstation 3100 Maintenance Manual page 201

180 Operating lnfonnatlon
7 .3.1 Loading and Unloading the Drive
To load the RX23, first make sure that the front LED is not lit. Then insert
diskette (Figure 7- 9). The diskette slides straight in and drops down to its
load position.
To unload the RX23, first make sure that the front LED is not lit. Then press
the eject button on the lower right side of the drive. The diskette unloads and
emerges from the drive.
TTl_XtHl_H
Figure 7-9 RX23 Loading and Unloading
7.3.2 RX23 LEDs and B_ uttons
The RX23 floppy drive has one LED on the front of the drive that indicates
when the drive is operating. Do not attempt to load or unload a diskette when
this LED is
lit.
The diskette eject button is also on the front of the drive.