Rx23 Diskette Drive Removal - Digital Equipment VAXstation 3100 Maintenance Manual

(
VS 3100 (Model 30) System 99
5. Position the switches on the right side of the new TZ30 to the same
position as on the old TZ30 you just removed. Usually, the switches are
set (Figure 4-13).
1° 1
Figure 4-13 TZ30 Jumper Switch Location
4.2.6 RX23 Diskette Drive Removal
1. Remove the system
box
cover (Section 4.2.1 ).
- O N
OFF-
MA-X0711-H
2. Disconnect the power cable and the data cable from the back of the RX23.
3. Unscrew the four screws from the RX23 's mounting bracket and lift the
bracket off the drive plate.
4. Remove the four screws from the RX23 's mounting bracket
(Figure 4-14).