Scsi Disk Eraser Messages - Digital Equipment VAXstation 3100 Maintenance Manual

86 Utllhles
>>>
T 75
PV SCS FMT CHN (A=l,B=O)? 1
PV-SCS-FMT-ID (0,1,2,3,4,5,6,7)? 3
Pv:scs:FMT:Ruaure (1/0)? 1
PV_SCS_FMTing ••..••.•• • ......... ?
PV_SCS_FMT_ERRf3
>>>
Figure 3-19 Example of an Error while Erasing an RZ55
3.18.1 SCSI Disk Eraser Messages
All messages for the data eraser start with PV _SCS_FMT. The second segment
of the message indicates what type of information the utility is looking for;
_QIN
for which SCSI bus the drive is on, _ID (0,1,2,3,4,5,6,7)? for the SCSI
address ID of the drive, and _RU sure (1/0)? for one last verification that you
do want to erase this drive. Table 3-11 lists all the data erasure messages and
gives
an
explanation
ior
each.
Table 3-11 SCSI Data Eraser Messages
Fomatter Message Explanation
PV _SCS_FMT_CHN (A=l, B=O)?
Asking
w1'.ich SCSI bus the drive is located
on.
PV _SCS_FMI'_ID (0,l,2,3,4,5,6,7)? Asking the SCSI address ID of the drive.
PV _SCS_FMI'_RUsure (1/0)7 The data eraser uses
this
question as a safety
check.
If
you want to erase the drive, enter 1
for
ves.
Otherwise.
enter
anv
characler other
than
1 to abort the . data eraser.
PV _SCS_FMiing The drive
is
being erased.
PV _SCS_FMI'_ERR# The eraser has
been
stopped because of the
error code indicated by the#. Table 3-12
lists the
error
codes.