Setting The Keyboard Language (T 54) - Digital Equipment VAXstation 3100 Maintenance Manual

78 Utilities
parameter block (RPB) in memory (the RPB contains addresses of certain
registers that hold restart information). Boot starts booting the operating
system software. Halt automatically baits the system and enters console mode.
Table 3-8 lists the recovery flags available.
Table 3-8 Default Recovery Flags
Number
Recovery Action Fhig
1
Restart
2
Boot
3 Halt
Figure 3-13 shows an example of changing the ftag from 2 (boot) to 3 (halt).
Press IReturnl to exit TEST 53 without changing the flag.
»>
TEST 53
>>>
OR
2
?
>>>
3
>>>
SET HALT 3
>>>
Figure 3-13 Example of Changing the NVR Recovery Action Flags
3.5
Setting the Keyboard Language (T 54)
Use the TEST 54 utility or use the SET KBD command to set the keyboard
language. Beth
methods
set the default keyboard language in the NVR.
The T 54 utility displays the language inquiry menu on the console device.
To choose another language for the keyboard, enter TEST 54 and select the
proper language or enter the language selection using the SET KBD command.
Press
I
RETURN
I
on T 54 to obtain the console prompt without changing the
language.