8-Plane Graphics Module Removal - Digital Equipment VAXstation 3100 Maintenance Manual

(
ALL OFF
AB BHOWH
VS 3100 (Model 40) System
123
Figure 5-13 RRD40 Jumper Switch Location
5.2.7 8-Plane Graphics Module Removal
1. Remove the system box cover (Section 5.2.1).
2. Remove both of the drive mounting panels (Section 5.2.2).
3. Remove the graphics module from the four standoffs, then lift the graphics
module off the system module (Figure 5-14). Two connectors disconnect
as you lift the module.