Table of Contents
Advertisement
. .
.
REPLACEMENT
4.6.2
Insert Installation
1.
Using four screws, fasten the insert to
the
Patch
and
Filter Panel assembly.
2.
Connect the internal cables to the insert.
3.
Refasten the Patch and
Filter
Panel
assembly
captive
screws .
4.
Reconnect any removed cables to
the
Patch
and
Filter
Panel assembly.
5.
Replace the rear cover.
6.
Turn-on
sy~tem
and monitor
power.
run.
7.
Run Macroverify.
4.7
FRONT CONTROL PANEL
4.7.1
Control Panel Removal
1.
Turn-off system and monitor power.
2.
Remove
the
system
ac
power
cord
receptacle.
Microverify
should
from
the
wall
3.
Remove the system unit front cover.
Grasp each
end
of
the cover and pull the cover toward you (Figure 4-8).
4.
Remove the four screws from the
front
of
the
control
panel assembly.
4-33
Advertisement
Table of Contents
