Example Of Strg-1 Extended Summary Report - Digital Equipment VAXstation 3100 Maintenance Manual

Testing 17
KA42-A
Vl.O
01
FS
********
SCSI-B STM SUMM
0 00:05:57
******
adr
rds
wts xfs xf err
sde
-------
-· - -----
-------
-· - -· - ---
003 008 000
157 000
1
004 008 000
073
000
1
005 008 004 023 000 1
*********
STM TYPE ANYTHING
- -
Figure 1-7 Example of SCSl-B Extended Summary Report
The adr is the SCSI address ID of a drive, rds is the number of reads performed
on that drive, wts is the number of writes performed on that drive, xfs is the
number of data transfers performed on that drive, and xferr is the number of
transfer errors on that drive.
KA42-A Vl .O
********
STRG-1
adr
002
01
rds
003
FS
STM SUMM
wts
serr
003 000
0 00:03123
******
herr
000
*********
STM TYPE ANYTHING
*********************************
- -
Figure 1-8 Example of STRG-1 Extended Summary Report
The adr is the address of the RX23 drive (002 for DUA2), rds is the number
of reads performed on the drive, wts is the number of writes perfonned on
the drive, serr is the number of soft errors detected, and herr is the number of
hard errors detected.
To display the extended summaries once again after exiting the system
exerciser, enter SHOW ESTAT. SHOW ESTAT brings up extended summary
information from the last time you ran the Field Service system exerciser.