Extended Summary Reporting - Digital Equipment VAXstation 3100 Maintenance Manual

16 Testing
A ? in the far left column indicates a soft error, ?? indicate a hard error,
and the absence of question marks usually indicates success. If an error is
indicated, go to the device's troubleshooting section in Chapter 2 to determine
whether or not the device must' be replaced for normal operation. Refer to
Appendix F
if you need additional information on the error codes.
Some devices display the progress count which indicates the progression of
the test for that device. At the beginning of each test pass, the progress count
is again initialized to zero.
1.4.3 Extended Summary Reporting
Extended summaries are available only when running the system exerciser
in Field Service mode. When running TEST 101, extended summaries are
available when the testing automatically stops after the second pass. When
running TEST 102, extended summaries are available when you halt the tests
by pressing
lcv1l [Q]
after the second pass of
the test
is complete. When running
TEST 80000106, extended summaries are not available but you can display the
results of the tests once again by pressing the halt button after the second pass
of the test is complete and entering SHOW ESTAT at the console prompt
>>>. Extended summaries contain adai i nal error information on some of
the devices
run
by the exerciser. Press
Return
to display the first extended
summary. Continue pressing
I Return
I
to display all of the extended summaries
nntii you return m the e:l!:.erdser display. Enter a second
lctril@]
to halt the
extended summaries and return
to
the console prompt >>>. Press
IReturnl
to stop the extended summary for the SHOW ESTAT command. The halt
message is displayed when the exerciser is stopped and control is returned to
the console. Figure 1-7 shows an example of the extended summary for the
SCSI-B device and Figure 1-8 show an example for the STRG-1 device.