Digital Equipment VAXstation 3100 Maintenance Manual page 232

(
E
Power-Up and Self-Test Error Codes
This appendix Jists all of the power-up and self-test error codes. There is no
difference between the power-up error codes and the self-test error codes.
Table E--1 lists the contents of this appendix by sections.
Table E-1 Falling Test/Device Section Listings
Fafilng Thst/Devtce
Tust F - Monochrome circuits (MONO)
Test E - TOY clock
(CLK)
Tust D - Nonvolatile RAM (NVR)
Tust C - Serial line controller (DZ)
Section
E.l
E.2
E.3
E.4
Tust B - System memory (MEM) E.5
Tust A- Memory management (MM) E.6
Tust 9 - Floating point (FP) E. 7
Test 8 - Interval timer (IT) E.8
Tust 7 - RX23 drive controller (STR0-1) (model 30) E.9
Tests 6 and 7 - SCSI bus controller (SCSI-A and SCSI-B) E.10
Tust 5 - Interrupt controller and Ethernet ID ROM (SYS) E.11
Tust 4 - 8-plane
graphics
option (8PLN) E.12
Test 3 - Not supported
Test 2 - Not supported
Tust 1 - Ethernet network (NI) E.13
211