Digital Equipment VAXstation 3100 Maintenance Manual page 215

194 Console Commands
• /N:<count> - The address is the first address
in
a range of
addresses specified in count. The console program deposits to
the first address and then to the specified number of succeeding
addresses. Even if
the address is tbe symbolic address "-",the
succeeding addresses are at the larger addresses. The symbolic
address specifies only the starting address, not the direction of
succession. For repeated references to preceding addresses, use
"Repeat Deposit - <data>".
Address
• Processor status longword (PSL) - The address space is set to
/M
automatically. Do not specify any address space qualifiers
with PSL.
• Program counter
(PC)
(general register Rl5) - The address
space is set to /G au omatically.
• Stack pointer (SP) (general register R14) - The address space is
set to /G automatically.
• General register
(RN) -
The register number is in decimal. The
address space is /G.
• +
(ulus) - The location immediately folloiving the last location
referenced in a DEPOSIT or EXAMINE command. For
references to physical or virtual memory spaces, the location
referenced is the last address plus the size of the last reference
(1
for byte, 2 for word, 4 for longword). For other address spaces,
the address is the last address referenced plus one.
• - (minus) - The location immediately preceding the last
location referenced in a DEPOSIT or EXAMINE command. For
references to physical or virtual memory spaces, the location
referenced is the last address minus the size of this reference (1
for byte, 2 for word, 4 for longword). For other address spaces,
the address is the last address referenced minus one.
• *
(asterisk) - The location last referenced in a DEPOSIT or
EXAMINE command.
• @
(at sign) - The location addressed by the last location
referenced in a DEPOSIT or EXAMINE command.