4-Color Bars Screen; Red Screen; Green Screen; Blue Screen - Digital Equipment VAXstation 3100 Maintenance Manual

I
I
(
Utilities
81
3.10 4-Color Bars Screen
This utility is only available when an 8-plane graphics module is installed.
This utility sends 4-color bars to the screen on the monitor connected to the
video port. Enter T 83 to display the 4-color bars on the screen. A loopback
connector must be attached to the communication port to run this utility.
3.11 Red Screen
This utility is only available when an 8-plane graphics module is installed.
This utility sends a full red screen to the monitor connected to the video port.
Enter T 84 to display the red screen. A loopback connector must be attached
to the communication port to run this utility.
3.12 Green Screen
This utility is only available when an 8-plane graphics module is installed.
This utility sends a full green screen to the monitor connected to the video
port. Enter T 85 to display the green screen. A loopback connector must be
attached to the communication port to run this utility.
3.13 Blue Screen
This utility is only available when an 8-plane graphics module is installed.
This utility sends a full blue screen to the monitor connected to the video
port. Enter T 86 to
dis~lay
the blue screen. A loopback connector must be
attached to the commumcation port to run this utility.
3.14 8-Color Bars Screen
This utility is only avaiJable when an 8-plane graphics module is installed.
This utility sends 8-color bars to the screen on the monitor connected to the
video port. Enter T 87 to display the 8-color bars on the screen.
3.15 8-Gray Scale Bars Screen
This utility is only available when an 8-plane graphics module is installed.
This utility sends 8-gray scale bars to the screen on the monitor connected to
the video port. Enter T 88 to display the 8-gray scale bars on the screen.