Installing The Chassis Intrusion Detection Switch - HPE ProLiant DL325 Gen11 User Manual

14. Install the high performance fans .
15. Install the air baffle .
16. Install the access panel .
17. Install the server into the rack.
18. Connect all peripheral cables to the server.
19. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
20. Power up the server.
Results Results
The installation is complete.
Chassis intrusion detection switch option Chassis intrusion detection switch option
The chassis intrusion detection switch enables iLO to record an event in the Integrated Management Log (IML) whenever the access panel is
physically opened or removed. An alert is also sent to the BIOS whenever a chassis intrusion is detected. The chassis intrusion detection
occurs as long as the server is plugged in, regardless of whether the server is powered on or off.
Subtopics Subtopics

Installing the chassis intrusion detection switch

Installing the chassis intrusion detection switch
Installing the chassis intrusion detection switch Installing the chassis intrusion detection switch
About this task About this task
HPE ProLiant DL325 Gen11 Server User Guide 180