Remove The Front Bezel - HPE ProLiant DL325 Gen11 User Manual

Install the access panel Install the access panel
Install the server into the rack Install the server into the rack
Power up the server Power up the server

Remove the front bezel

Remove the front bezel
About this task About this task
If you are using the iLO virtual power button to power the server on/off, you do not need to remove the front bezel. Remove the front bezel
only if you need to access the front panel components.
Procedure Procedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
2. Press the bezel release latch, and then pivot the bezel open.
3. Release the right side of the bezel from the front panel.
HPE ProLiant DL325 Gen11 Server User Guide 47