b. Disconnect each power cord from the server.
6. Disconnect all peripheral cables from the server.
7. Remove the server from the rack.
8. Place the server on a flat, level work surface.
9. Remove the access panel .
10. Remove the secondary riser cage blank.
11. Remove the default secondary riser cage bracket.
Retain the screws and bracket. These screws will be used to secure the new NS204i-u + secondary low-profile riser cage bracket.
12. Install the NS204i-u + secondary low-profile riser cage bracket.
HPE ProLiant DL325 Gen11 Server User Guide
160