3. Install the access panel .
4. Perform the post-installation or maintenance steps required by the procedure that necessitates the removal of the middle cover.
Install the access panel
Install the access panel
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
Procedure
1. With the access panel latch open, insert the guide pin on the chassis through the hole on the bottom side of the latch.
2. Close the access panel latch.
The access panel slides to the closed position.
3. Lock the access panel latch.
HPE ProLiant DL325 Gen11 Server User Guide
62