HPE ProLiant DL325 Gen11 User Manual page 15

Item Item Description Description
1 Slot 1 PCIe5 x16
2 NS204i-u boot device (optional)
3 Slot 2 PCIe5 x16 (optional)
4 Slot 2 PCIe5 x16 (optional)
5 Flexible Slot power supply 2 (optional)
6 Flexible Slot power supply 1
7 VGA port
8 Slot 22 OCP PCIe5 x8
9 Serial port (optional)
10 iLO dedicated network port
11 USB 3.2 Gen1 ports
12 Slot 21 OCP PCIe5 x8
This riser slot is in the primary riser cage.
1
This option is in the NS204i-u + low-profile riser cage.
This riser slot is in the NS204i-u + low-profile riser cage.
2 3
This riser slot is in the secondary riser cage.
4
In Slot 21 OCP, the OCP bandwidth upgrade cable is required to support a x16 OCP expansion option.
5
Subtopics Subtopics
Display device setup Display device setup
Display device setup Display device setup
This server supports both VGA port and DisplayPort 1.1a. Before connecting a display device to this server, review the information below.
Whenever possible, use the same display connection type. For example, if your PC or monitor only has a VGA output, connect it to the
server VGA port. Use of any kind of adapter or converter cable or dongle might lead to decreased display quality or a lag over the
connection.
DisplayPort connection: When connecting an HDMI or DVI display to the DisplayPort, use an active type adapter. Passive type adapter—
marked with the DP++ symbol—is not supported.
Display output modes:
If you connect two display devices to the VGA port and DisplayPort, the same image is shown on both devices—screen mirroring
mode.
The embedded video controller in the iLO 6 chipset does not support dual display or screen extension mode. To enable dual display
1
2
3
4
5
HPE ProLiant DL325 Gen11 Server User Guide 15