HPE ProLiant DL325 Gen11 User Manual page 113

CAUTION: CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static-
sensitive devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack.
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the middle cover .
9. Remove the universal media bay blank.
Retain the screws and blank. These screws will be used to secure the new optical drive cage.
10. Remove the optical drive bay blank from the drive cage.
Retain the blank for future use.
HPE ProLiant DL325 Gen11 Server User Guide 113