HPE ProLiant DL325 Gen11 User Manual page 134

Install the secondary riser cage.
12. To enable the FBWC feature of the storage controller, install an energy pack.
13. Install the middle cover .
14. Install the access panel .
15. Install the server into the rack.
16. Connect all peripheral cables to the server.
17. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
18. Power up the server.
19. Update the server firmware if they are not the latest revision .
20. Configure the controller .
Results Results
The installation is complete.
Energy pack options Energy pack options
If there is an unplanned server power outage, the flash-backed write cache (FBWC) feature of HPE storage controllers requires a centralized
backup power source to back up the write cache data in a flash device. This server supports the following power options—collectively
known as energy pack:
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
One energy pack supports multiple devices. After it is installed, the status of the energy pack appears in HPE iLO. For more information, see
the iLO user guide:
HPE ProLiant DL325 Gen11 Server User Guide 134