Table of Contents
Advertisement
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the server from the rack.
5. Place the server on a flat, level work surface.
6. Remove the access panel .
7. Remove the middle cover .
8. Remove the riser cage.
9. Remove the riser slot blank.
Retain the screw and blank. This screw will be used to secure the new type-p storage controller.
10. Install the type-p storage controller.
Make sure that the controller is seated firmly in the slot.
11. Install the riser cage.
HPE ProLiant DL325 Gen11 Server User Guide
130
Advertisement
Table of Contents
